At Target we have all the products you need to seal your driveway from start to finish. We have products that will clean out rust and oil stains, acid wash if necessary, and everything else in between to prep your driveway for sealing. If you have an asphalt driveway we have all the crack fillers and patch repair products you need. Once you're ready for the sealer we sell a wide range of sealers, whether you have interlock, stamped concrete, plain concrete or asphalt, we have the sealer you need. We also have all the tools required to apply the sealer from trays, rollers, and brushes to professional sprayers. Visit your professional staff and they will give you all the information you need to seal your driveway.

Be sure to visit our DRIVEWAY SEALERS page for all the products you need to get the job done!

Sealing Proceedure

• First you need to make sure the driveway is free of dust and dirt, and clean any stains that could affect the bonding between the sealer and asphalt.
• Fill in any cracks or holes with the crack filler or level patch depending on the size of cracks or holes you have.
• Ensure the driveway is thoroughly dry before application of sealer. If you are using a power washer, you must let the pavement dry for 24 hours because water will be forced into the surface due to the high pressures of the power washer and needs a longer drying period.
• Asphalt sealers can be applied with either a roller or squeegee. If you are using a squeegee you will use up more material but will fill every little imperfection and have a nice smoother finish.
• Start from one end of your driveway and slowly work down to the other. Allow sealer to dry for at least a few days before opening for vehicle traffic.