Waterproofing
Home » Products Catalog » Waterproofing
-
Big-O-Drain Tile
Good drainage can improve crop yield and eliminate soil erosion. Since 1967, drainage contractors and farmers have relied on Big O tubing and fittings to help their business. Today, Big O tubing is also widely used in residential applications for foundation drainage and water management around the home and yard. Manufactured by Armtec, Big O HDPE pipe products are resistant to chemical and corrosion attack. They will not deteriorate and are not affected by freeze and thaw cycles. Count on Armtec for quality products, on-time delivery and ongoing field support. Available with or without sock.
Sizes:
- 4"x100'
- 4"x250' -
End Caps
End cap for 4" Drain Tile
-
Insert Tees
Insert Tees for 4" Drain Tile
-
Insert Couplings
Insert Couplings for 4" Drain Tile
-
Sump Pump Pit / Lid
25" High Density Polyethylene Sump Pump Liner and Lids
-
Resisto Basic Waterproofing membrane
RESISTO BASE SHEET WATERPROOFING MEMBRANE is mostly used as a base sheet in the two-ply roofing system and for any below grade waterproofing job, shower bases and wash areas. 60-mil-thick, self-adhesive membrane composed of elastomeric bitumen and a trilaminated woven polyethylene.
Packaging
39"x65 RollTechnical Data Sheet:
MSDS Sheet: -
Resisto Multipurpose Aluminum Waterproofing Membrane
40-mil-thick (1.0 mm) membrane composed of elastomeric bitumen. The top surface of the membrane is covered with an aluminum sheet. ALUMINUM WATERPROOFING MEMBRANE is mostly used for flashing and repairs and any other small maintenance job.
Packaging
- 8"x33'
- 5"x33'Technical Data Sheet:
MSDS Sheet: -
Resisto Membrane Exterior Primer
Use it to prime and prepare exterior concrete, metal, wood and plywood surfaces to enhance the adherence of RESISTO self-adhesive membranes and waterproofing tape.
Packaging
- 1gal and 5gal pailsTechnical Data Sheet:
MSDS Sheet: -
Resisto h2o Primer
Interior or exterior polymeric emulsion-based primer that is perfect when the use of solvent-based primer is not recommended. Use it to prime and prepare concrete, metal, wood, plywood and polystyrene surfaces to enhance the adherence of RESISTO self-adhesive membranes and waterproofing tapes.
Packaging:
- 1Qt
- 1GalTechnical Data Sheet:
MSDS Sheet: -
Red Zone Air Barrier & Waterproofing Membrane
Red Zone air barrier & waterproofing membrane is a 40-mil thick self-adhesive membrane composed of elastomeric bitumen and trilaminate woven polyethylene. It is designed as an air/vapour barrier for exterior walls and must be cover with sheathing or other finishing material. It has an easy-to-remove, silicone-treated realse sheet on the self adhesive side.
Packaging
- 4"x50'
- 6"x50'
- 9"x50'
- 12"x50'Technical Data Sheet:
MSDS Sheet: -
Resisto Stucco Transition Tape (STT)
STT is a self-adhesive membrane compised of SBS modified bitumen and a non-woven polyester exposed reinforcement. The slef-adhesive side is protected by a silicone relase film. The non-woven polyester top surface provides good adhesion properties for liquid applied air/vapour barrier and exterior finishing coating.
Packaging:
- 4"x55'
- 6"x55'Technical Data Sheet:
MSDS Sheet: -
Resisto Foundation Coating
RESISTOSEAL CONSTRUCTION FOUNDATION COATING is composed of bitumen and fast-evaporating solvent. It is used for foundation walls, footings, retaining walls, wing walls, abutments and culverts.
Packaging
- 1gal and 5gal pailsTechnical Data Sheet:
MSDS Sheet: -
Resisto Winter Foundation Coating
RESISTOSEAL CONSTRUCTION WINTER FOUNDATION COATING is composed of bitumen and fast-evaporating solvent. It is used for foundation walls, footings, retaining walls, wing walls, abutments and culverts. Ideal in winter conditions.
Packaging:
- 5gal Pails *Special Order*Technical Data Sheet:
MSDS Sheet: -
Blueskin WP 200
Blueskin® WP 200 is a self-adhering composite membrane consisting of an SBS rubberized asphalt compound, integrally laminated to a blue, high-density polyethylene film. The membrane is specifically designed for self-adhering to a prepared substrate, and provides a high-performance waterproofing barrier.
Packaging
3'x67' Roll -
Blueskin SA
Blueskin SA is a self-adhering membrane consisting of an SBS rubberized asphalt compound laminated on a blue polyethylene film. Impermeable to air, moisture vapor and water, Blueskin SA is designed to install easily on a variety of prepared substrates.
Packaging
- 9"x75'
- 12"x75'
- 18"x75' rolls -
Bakor Blueskin Adhesive
Blueskin Adhesive is a quick drying, rubber-based adhesive designed to enhance the adhesion of self-adhered membranes, such as Blueskin WP and SA.
-
Bakor Polybitume 570-05
Polybitume 570-05 is a top-quality, high solids, rubber asphalt caulking and sealing compound formulated to provide extra flexibility and a good bond. It exceeds the performance standards of asphalt caulking compounds.
Packaging
- 300ml tubes -
Bakor Blueskin Spray Primer/Adhesive
Blueskin Spray Prep is a rubber-based spray adhesive designed to enhance the adhesion of Blueskin membranes.
Packaging
- 425g aerosol -
Bakor Foundation Coating
Henry/Bakor 700-01 is a dampproofing and waterproofing emulsion composed of vacuum-reduced asphalt dispersed in a mineral colloid emulsifier. It is odourless, non-toxic, of heavy brush consistency, exhibiting excellent adhesion to both damp and dry construction surfaces. The cured coating presents a stable, ductile coating impervious to sustained contact with water. Environmentally friendly material containing no asbestos or volatile compounds.
Packaging
5gal (18.93L) pail -
Bakor 710-11 Premium Grade Foundation Coating
Bakor 710-11 is a top quality, medium consistency, solvent type waterproofing and Dampproofing compound of selected asphalts and fibres permitting application in thick films. Bonds well to dry, frost-free masonry and concrete surfaces and are particularly well adapted to spray application. The cured coating is impervious to sustained contact with water. Exceeds the requirement of CAN/CGSB 37.16.
Packaging
- 5gal (18.93L) pail -
Leak Bye
Leak-Bye is used in conjunction with approved breather type foundation wrap applied on the interior of the foundation. This feature allows conventional breathing and retains accumulating condensation or seepage from above or below grade, directing it down the wall and over the footing, to drain away normally via standard drainage. Complete moisture control is now achieved with the traditional upper and new lower Leak-Bye systems acting simultaneously.
-
Platon Membrane
Platon is a tough, waterproof, double dimpled, high-density polyethylene plastic membrane that keeps wet soil away from the foundation wall. The dimples create an air gap between the wall and the waterproof membrane. Any water that does find its way past the membrane flows to the footing drain. Can be cut by the foot if required.
Packaging
- 5'5"x65' roll
- 6'10"x65' roll
- 8'x65' roll -
Platon System Speed Clips
Secures the membrane and presses it smooth tight to the wall.
-
Platon Plugs
Used to help secure Platon membrane.
-
Thoroseal Foundation Coating
A portland-cement-based waterproof coating for exterior below-grade concrete and masonry. It can also be used as a waterproof base coat on above-grade walls before they are overcoated with Thorocoat® or Thorosheen®.
Packaging
50lb Bags -
Thoroseal
A portland-cement-based waterproof coating for concrete and masonry. Thoroseal® resists both positive and negative hydrostatic pressure, enabling it to waterproof both interior and exterior surfaces. It fills and seals pores and voids, correcting surface irregularities and eliminating the need for concrete rubbing. Thoroseal® creates a low-cost, low-maintenance, highly durable water barrier that is resistant to damage from impact, abrasion, and mildew. It can be overcoated with a variety of Thoro® decorative finishes.
Packaging
- 50lb bags -
Acryl 60
An acrylic-polymer emulsion that is mixed with portland cement mortars, plasters, stucco, and concrete mixes. Acryl® 60 improves the adhesion, cohesion, tensile, compressive, and flexural strengths of these cement-based materials. This nonyellowing, water-base material is suitable for applications interior and exterior, above and below grade. Acryl® 60 produces a hard, strong, and fast cure for a wide variety of concrete-repair and cement-based coating materials. For use with Thoroseal Products.
Packaging
- 1qrt
- 1gal
- 5gal -
Waterplug
Waterplug® is a one-component, quick-setting, Portland-cement-based hydraulic repair mortar that instantly stops running water through holes or cracks in concrete or masonry. It expands as it sets to lock into place even under constant water pressure.
Packaging
- 50lb bags -
EMACO Plug
Emaco® Plug is a cement-based water-stop mortar. It will stop running and seeping water through cracks in concrete under hydrostatic pressure. It can also be used to provide a watertight seal in pipes, tanks, manholes, and a variety of other locations.
Packaging
- 50lb Pail -
Drainline 100 With Grate
DrainLine 100 is a durable polymer concrete trench drain system for use around residential, office, and other light duty areas.
The system offers a number of outlet options with bottom knockouts, choice of outlet caps and in-line catch basins.Size
- 1m lengths -
K100-S Channel
The world’s most popular general purpose trench drain system is available with a wide variety of grates in different materials, slot configurations, and load ratings. Grates are secured into the channel by ACO’s patented boltless locking device - QuickLok. KlassikDrain’s interconnecting polymer concrete channels feature an integrally cast-in galvanized (K100S) or stainless steel wearing edge rail (KS100S), and come in sloped and neutral depths. A full range of accessories completes the system.
Packaging
- 1M lengths internally slopped
- Grates are extra
