Insulation
Home » Products Catalog » Insulation
-
Johns Manville Batt Insulation
Johns Manville unfaced building insulation is a lightweight, naturally white thermal and acoustical fiber glass. It is made with Formaldehyde-free™ binder for better indoor air quality. JM Unfaced Batts provide insulation in R-values from R-11 to R-40 and are also effective in controlling unwanted noise in internal walls.
-
Roxul Acoustical Fire Batt (AFB)
ROXUL AFB® (Acoustical Fire Batt) is a batt insulation product designed specifically for application in wall/floor systems where acoustical performance and fire resistance are the primary concerns. This noncombustible lightweight product has excellent acoustical dampening properties and is dimensionally stable which makes it ideal for friction fit into wall partitions and system applications from party walls to plant/manufacturing walls. The product is chemically inert which means that it will not promote corrosion. The AFB product comes in a number of thicknesses to meet the requirements of both retrofit and new construction applications. This product is designed specifically for friction fit into wall partitions and system applications from party walls to plant/manufacturing walls.
-
Foundation Blanket Insulation
R12 3' x 50' R12 4' x 25' R12 4' x 50' R26 4' x 25' -
Metal Building Insulation
1-6" tabbed R12 - R20 rolled fiberglass insulation with facing -
Greenguard Extruded Polystyrene Sheets (30psi)
GreenGuard Type IV 30 PSI Insulation Board is an ideal exterior insulation, meeting your needs for multiple applications. Its extruded polystyrene (XPS) construction provides superior moisture resistance. And since it does not absorb moisture, it retains its insulating properties over time. With an R-Value of 5.0 per inch of thickness, the board increases the energy efficiency of your structures. Plus it’s lightweight, easy to handle, and easy to cut with a knife. Use this insulation for below slab, cavity wall, and foundation applications. It meets and exceeds all Type IV and Type X specifications.
Sizes
- 1"x2'x8'
- 1"x4'x8'
- 1-1/2"x2'x8'
- 2"x2'x8'
- 2"x4'x8'
Available Butt Edge or Ship Lapped -
MAX House Wrap
MAX™ offers the best in building wrap performance. You get the water and air barrier properties that walls need for moisture protection and energy efficiency. Plus you get the durability and economical price that make this GreenGuard innovation a real world practicality. MAX is non-perforated, providing superior resistance against rain before the cladding goes on and against water that seeps through the cladding after installation. It also serves as a qualified air barrier. Stays UV-stable up to 6 months.
Packaging
- 9'x100' Roll -
Foil Faced Insulation Board
Johns Manville AP Foil-faced sheating board is composed of a uniform closed-cell polyisocyanurate foam core bonded on each side to a trilaminate foil facer. One side has a printed foil reflective facer and the other side has a printed non-reflectve foil facer, depending on your building needs. AP is now produced with a non-HCFC blowing agent, meeting the latest environemtnal regulations for using chemicals that do not harm the protective ozone layer in the earth's atmosphere. The new formula enchances the positive environmental profile for this energy-saying product.
Sizes
- 3/4"x4'x8'
- 1"x4'x8'
- 1-1/2"x4'x8'
- 2"x4'x8' -
Earthwool 1000 Deg. Pipe Insulation
Knauf Insulation Earthwool™ 1000° Pipe Insulation is a molded, heavy-density, one-piece insulation made from inorganic glass fibers bonded with ECOSE® Technology . It is produced in 3’ lengths with or without a factory-applied jacket.
ASJ+ is the newest generation all-service jacket composed of aluminum foil, reinforced with a glass scrim bonded to a kraft paper interleaving with and outer film layer leaving no paper exposed. A matching ASJ+ butt strip is furnished in the carton for each section. The jacket is white, and the longitudinal lap of the jacket has a self-sealing adhesive.
All sizes available
-
Duct Liner 1.5LB and 2LB
Knauf Sonic XP™ Duct Liner with ECOSE® Technology is a flexible, mat-faced insulation bonded with ECOSE Technology. It is faced with a tightly bonded mat to give the airstream a smooth, tough surface, resisting damage during installation and operation. The encapsulant edge coating eliminates airstream flaring. Specifically designed as an interior insulation material for sheet metal ducts used in heating, ventilating and air conditioning. Provides an optimum combination of efficient sound absorption, low thermal conductivity and minimal airstream surface friction.
Packaging
- 1"x47'x100'
- 1"x59'100'
- 1/2"x47'x100' -
Friendly Feel Duct Wrap
Knauf Insulation Friendly Feel® Duct Wrap with ECOSE® Technology sets a new industry benchmark for sustainable, high-performance, cost-effective insulation solutions. To create the next generation of sustainable insulation, we combined:•Sand, one of the world’s most abundant and renewable resources, •Minimum 45% post-consumer recycled bottle glass and •ECOSE Technology
Packaging
- 1"x4'x100'
- 1-1/2"x4'x100'
- 2"x4'x75'
- 3"x4'x50' -
Knauf Insulation Board with ECOSEĀ® Technology
Knauf Insulation Board with ECOSE® Technology is a thermal and acoustical insulation product bondedvwith ECOSE Technology. It is available plain, with a factory-applied FSK facing, PSK (metalized polypropylene-scrim-kraft) or with a factory-applied all-service jacket (ASJ).
Packaging
- 1"x2'x4'
- 1-1/2"x2'x4'
- 2"x2'x4'
- 3"x2'x4' -
AYR FOIL A2V
The Ayr-Foil A2V is a vapour barrier & reflective insulation which increase the efficiency of the insulation system. The white film contains UV resistant additives for maximum protection and increased longevity.
Packaging
- 4'x12.5' (50sqft)
- 4'x62.5' (250sqft)
- 4'x125' (500sqft)
- 8'x62.5' (500sqft) -
Ethafoam Backer Rod
Sizes:
- 1/4"
- 3/8"
- 1/2"
- 5/8"
- 3/4"
- 1"
- 1-1/4" -
Cerblanket High Temperature Refractory Insulation
Cerablanket is produced from exceptionally pure oxides of alumina and silica using the spinning process. The resultant quality spun fibers have been optimized for high handling strength, with on average the highest tensile strength of any Thermal Ceramics ceramic fiber blanket. Cerablanket is available in a wide variety of densities and sizes. Cerablanket offers excellent handleability and high temperature stability which allows it to meet a wide range of hot face and back up insulation applications in furnaces, kilns and other equipment requiring high temperature heat containment.
Packaging:
- 4lbs 2"x2'x12.5'
- 8lbs 1"x2'x25'
- 8lbs 2"x2'x12.5' -
Super-Six Vapour Barrier
Polytarp Super-Six CGSB Vapour Barrier has been proudly certified to the CAN/CGSB-51.34-M86 for the past 20 years. Only exceptional quality resins and other raw materials are used in the manufacturing of Super-Six.
Packaging:
- 8.5' x 58'
- 8.5' x 176'
- 10' x 100'
- 20' x 100'