Concrete Products
Home » Products Catalog » Concrete Products
-
Stain-Crete
Stain-Crete is a deep penetrating; acid-based stain that can be used to color old or new concrete that has cured for 14 to 28 days. Stain-Crete can also be used in conjunction with Increte Systems New-Crete, self leveling overlay system after New-Crete has cured 25 Hours. Stain-Crete chemically reacts with cured concrete to procide a distinctive, permanent color with a subtly shaded marbled effect, similar to the aged appearance of natural stone. Stain-Crete's rich variegated finish will not peel, crack, chip, or fade. Stain-Crete provides a terrific custom look and is ideal for residential, commercial, or municipal applications, including all masonry surfaces, horizontal or vertical surfaces such as basement floors, garage floors, driveways, entryways, patios, pool decks, sidewalks, as well as restaurants, amll enterances, hotels, and showrooms.
Packaging
Available in 1gal bottoles
Colours
Black, Bronze, Lime Green, Mission Tan, Rust Brown, Terracotta, Walnut, Weathered Copper -
Stone Essence
Stone Essence is a unique eco-friendly alternative to acid stained concrete. Stone Essence is a concentrated water-based coloring system composed of UV stable, transparent iron oxide pigments. Stone Essence is not a sealer, but surfaces colored with Stone Essence can be sealed with either solvent or waterborne sealers.
Packaging
- 1qrt bottles, mixes with water 3 to 1
Colours:
Red Rock, Spanish Tile, Terra Cotta, Fired Brick, Rust Brown, Spanish Gold, Mission Tan, Bronze, Walnut, Wet Sand, Timber, Faded Fern, Dense Foliage, Weathered Copper, Lime Green, Terquoise, Storm Grey, Deep Blue, Rich Earth, Black -
Power-Bolt
The Power-Bolt anchor is a heavy duty sleeve style anchor which is vibration resistant and removable. It is available with a finished hex head or flat head with a hex key insert and can be used in concrete, block, brick, or stone.
Sizes:
1/4"x1" to 3/4"x8-1/4" -
Power-Stud
The Power-Stud anchor is a fully threaded, torque-controlled, wedge expansion anchor which is deisnged for consistent performance in cracked and uncracked concrete. Suitable base materials include normal-weight concrete, structural sand-lightweight concrete and concrete over metal deck.
Sizes:
1/4"x1-3/4" to 1-1/4"x12" -
Lok-Bolt AS
The Lok-Bolt AS anchor is a pre-assembled single unit sleeve anchor available in carbon steel and stainless steel which can be used in concrete, block, brick and stone. Extension sleeves are added to create longer lengths.
Sizes:
1/4"x5/8" to 3/4"x7-1/2" -
Wedge-Bolt
The Wedge-Bolt anchor is a once piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The Wedge-Bolt has many features and benefits that make it well suited for many applications in a variety of base materials. The anchor is designed for consistent and reliable performance in cracked and uncracked concrete.
Sizes:
1/4"x1-1/4" to 3/4"x10" -
Tapper
The Tapper, is a one-piece self-tapping concrete screw for use in a variety of light to medium duty applications in base materials including concrete, masonry and wood. It features a corrosion resistant Perma-Seal coating and an optimized thread design for lower torque. The screw also incorporates a gimlet drill point for wood base materials (no pre-drilling required).
Sizes:
3/16"x1-1/4" to 1/4"x6" -
Wall-Dog
The Powers Wall-Dog is the industry's first all steel one-piece screw anchor, which features high-profile threads for easy fastening into wallboard and other masonry base materials. Its deep cutting, corkscrew-like threads provide for smooth eantry and strong hold, and when removed the Wall-Dog leaves a much smaller hole than toggles or other systems. For fastening into wallboard or wood, no pre-drilling is required. Fastening into concrete, hollow or grout filled block, brick and plaster requires a pre-drilled 3/16" ANSI hole.
Sizes:
3/16"x1-1/4" to 3/16"x2-1/2" -
Dirt & Grease Cleaner
Techniseal's Dirt & Grease Cleaner is the most effective product available for removing motor oil and grease (barbecue) stains from pavers and slabs made of concrete or natural stone. It dissolves, dislodges and encapsulates grease, thoroughly cleaning without leaving any oily film after rinsing.
-
Professional Grade Oil & Grease Remover
Industrial strength petroleum-based product remover. It lifts and absorbs embedded oil and grease stains as it dries from a liquid to a powder. Specially formulated for concrete pavers, slabs and walls, natural stone, poured or stamped concrete, etc., TECHNISEAL PROFESIONNAL GRADE OIL & GREASE REMOVER works without damaging or discoloring the material and is easy to use.
Packaging
950ml bottle -
Rust Remover
Formulated to take out rust from pavers and slabs made of concrete. It effectively dissolves stains caused by rusted metal and fertilizer granules, etc. Since it contains no hydrochloric (muriatic) acid, it won't damage the pavers.
Packaging
1L bottles -
Soy Gel
SOY•Gel is an industrial strength and consumer friendly paint, urethane, epoxy and acrylic stripper made with 100% American grown soybeans. The low evaporation rate of SOY•Gel and its gel formulation make it possible to remove several layers in one application. SOY-Gel will not lighten any acid stained, color hardened and integrally colored concrete surfaces (will lighten or remove solvent dyes and water-based stains). SOY-Gel contains no methylene chloride, is not an alkaline based stripper and cleans up easily with water. Unlike more traditional paint strippers SOY Gel lets you work without the odor. Indoors or outdoors, you can be guaranteed a safe restoration process with SOY Gel.
Packaging
1 qrt, 1 gal, 5 gal -
Emerge
Emerge is an all purpose cleaner with a label that says it all, "All you need for all you clean". EMERGE is a versatile concentrated cleaner for cleaning a multitude of hard surfaces. Clean oil, grease, dirt, and grime, from asphalt, concrete, metal, and painted walls. Environmentally friendly, no VOC's, no global warming potential and safe to use, EMERGE is ideal for any cleaning job!
Packaging
1gal and 2.5gal -
EBC2
EBC2 is a blend of mild natural acids and super infusion surfactants. EBC2 is ideal of cleaning building exteriors and removing cement film, lime residue, mortar residues, moss and algae, surface rush and environmental dirt. Suitable for use on all natural stones, polished surfaces, aluminum, stucco, fine stoneware, tiles, high-alloyed steel, stainless steel, glass, plastic, ceramics and much more. A top product for cleaning swimming pools. It is also excellent as a basic and maintenance sanitary cleaner.
Packaging
1gal and 2.5gal -
VeraSafe Acid Replacement
VeraSafe is a safe organic replacement for traditional harmful acids, such as Hydrochloric, Sulfuric and Muriatic acid. It can be used for a multitude of different applications. This revolutionary new acid alternative clears with the industrial strength you would expect, yet it is so safe it will not burn your skin. VeraSafe is non-fuming, environmentally safe and 100% biodegradable. VeraSafe will give you excellent performance with none of the hazards of a traditional acid, providing peace of mind, while saving you time and money.
Packaging
1qrt, 1gal, 5gal -
Decorative Stamps
A wide range of stamping tools available ranging from Brick, Granite, Slate, Stone, Seamless Textures and Wood Plank. Increte Systems.
-
Ready Mix Concrete Colour
Innovative Mix-Ready bags disintegrate during mixing for clean color handling and no environmental waste. Ready Mix operators just toss unopened Mix-Ready bags into the mixer. Mix-Ready bags are made of special paper and adhesive which get soggy when wet and disintegrate during mixing. The bags release Davis Color deep in the mixer to disperse uniformly. Color handling is clean and environmental waste is minimized.
Packaging:
- 25lb
- 5lb bags -
Concrete Color Hardeners
Color Hardener is a ready-to-use colored surface hardener for coloring and hardening concrete floors. It is applied as a fry shake over freshly leveled and floated concrete in medium to heavy duty industrial, commercial, and residential areas. Color Hardener is comprised of a pre-tested cement; hard, wear-resistant specially-graded silica quartz aggregatel finely ground alkali-fast and light-fast inorganic coloring pigments and other propriety components which improve the properties of the finished concrete surface. Color Hardener builds in color and durability and eliminates the cost of periodically painting the surface.
Packaging
65lb pail -
Release
Color and Clear releases contrain a specially-formulated releasing agent that form a moisture barrier between the stamping tools and wet concrete facilitate the release of flexible tools. It is a dry shake material applied directly on top of the concrete, Color Hardener, or Thin-Crete prior to stamping. The colored releasing agent contains integrated iron oxide pigments and add color and depth to the stamped surface. The clear leaves no trace. For use on stamped concrete products only.
Packaging
35lb pail -
Antique Release
Increte Antiqing color and clear releases are an economical alternative to traditional releases. Antique releases contain a specially formulated releasing agent that forms a moisture barrier between the stamping tools and wet concrete to facilitate the release of flexible tools. It is a dry shake material applied directly on top of the concrete, Color Hardener, or Thin-Crete prior to stamping. The colored antique release contain integrated iron oxide pigments to add color and depth to the stamped surface. The clear leaves no trace. For use on stamped concrete products only.
Packaging
35lb pailColours
Autumn Brown, Charcoal, Dark Brown, Dark Grey, Desert Tan, Grey, Light Grey, Rust Brown, Sand Buff, and Sun Grey -
Liquid Release
Liquid Release is a specially formulated liquid release agent for use where powder release agents are too dusty to use. This release agent conditions the stamping tool to prevent the concrete from sticking to it, and allows for the best possible imprint without pulling up the surface.
Packaging
5gal pail -
Surface Retarder
CONCRETE SURFACE RETARDERS are chemical formulations which retard, but do not "kill" the set of the mortar at the surface of concrete. When the underlying concrete has hardened, the retarded mortar surface can be flushed off with a stream of water and/or removed by scrubbing with a stiff brush. Since these compounds do no "kill" the set, if they are left on the concrete or unintentionally splashed on other fresh concrete, they will permit the concrete to eventually attain a set and achieve full strength. CONCRETE SURFACE RETARDERS are available in two formulations to meet varying job requirements: FORMULA F is a paint-like emulsion designed for application directly to forms, FORMULA S is a neutral, sprayable liquid for application to freshly placed horizontal concrete surfaces.
Packaging
5 gal pail -
EUCO Winter Admixture
EUCO Winter Admixture is a multi-purpose liquid admixture to accelerate the normal setting rate of mortar, increase strenght develpoment at all ages, and to improve workablilty. It can be used safely with gray or white portland cement or colored masonry cements without causing discoloration.
Packaging
- 1 gal pail
- 5 gal pail -
Rebar
Reinforced steel rods
Sizes:
10M (1/2") x 10'
10M (1/2") x 20'
15M (5/8") x 10'
15M (5/8") x 20' -
Welded Wire Mesh
Wire mesh is available in Rolls and Sheets, Plain and Coated, for reinforcing concrete in precast and cast in place and mine support screen.
6x6x10/10 6x6x9/9 6x6x6/6
4'x8' Sheets 8'x12' Sheets 4'x8' Sheets
5'x150'
Roll, 6'x100' Roll, 6'x200' Roll -
Curing Blankets
The Polytarp Bubble Blanket offers an R value of 2.15, almost doubling that of competitive 1/2" foam blanket.
Sizes:
- 8' x 25'
- 4' x 25' -
Enviro-Poxy
Enviro-Poxy is a two component 100% solids epoxy floor coating. This is an advanced, environmentally friendly two component 100% solids epoxy coating system which contains no VOC's (Volatile Organic compounds), no solvent, no water and virtually no odor. Enviro-PoxyTM has been designed to provide superior functional and decorative properties by providing high chemical resistance, high mechanical strength, excellent durability and adhesion which protects the substrate from wear, chemical attack, stains and mechanical stress while offering a beautiful porcelain like high gloss finish.
Packaging
- 2L kits
- 4L kits -
Fiber Expansion Joints
Fiber expansion joint is composed of cellular fibers securely bonded together and uniformly saturated with asphalt to assure longevity. Wherever a cost-effective joint filler is required, fiber expansion joint meets the need. Ideal for use on highways, streets, airport runways, sidewalks, driveways, flatwork and scores of commercial and industrial applications subject to pedestrian and vehicular traffic.
Sizes
- 3/8"x4"x10'
- 1/2"x3"x10'
- 1/2"x3.5"x10'
- 1/2"x4"x10'
- 1/2"x5"x10'
- 1/2"x6"x10'
- 1/2"x8"x10' -
Deck-O-Foam (Foam Expansion Joint)
DECK-O-FOAM expansion joint filler is a flexible, lightweight, non-staining, polyethylene, closed-cell expansion joint filler. It is a chemical-resistant, ultraviolet stable, non-absorbent, low density, economical, compressible foam that offers an extended service life in both interior and exterior applications. DECK-O-FOAM is supplied with a convenient, pre-scored removable strip to provide a uniform sealing reservoir in the joint. It also serves as a sealant bond-breaker and provides an economical alternative as an expansion joint in all concrete paving projects. It is compatible with all currently available cold-applied sealants.
Sizes
- 1/4"x3"x100'
- 1/4"x4"x100'
- 1/2"x3"x50'
- 1/2"x4"x50'
- 1/2"x5"x50'
- 1/2"x6"x50' -
Non-Shrink Grout
NS GROUT is designed for critical use where high strength, non-staining characteristics and positive expansion are required. It contains only natural aggregate and an expansive cementitious binder. It is extremely flowable, and when cured, appears similar in appearance to concrete.
Packaging
- 50lb bags -
Non-Shrink Metallic Grout
NS METALLIC GROUT is a factory-blended, non-shrink grout for use in critical applications. It incorporates the latest technological advances in shrinkage prevention and internal reinforcement. It is virtually non-staining and, therefore, useful in many aesthetic applications. The expansion of NS METALLIC GROUT is not dependent upon, nor accompanied by oxidation of metallic aggregate, nor is the expansion dependent on the liberation of gas. NS METALLIC GROUT is internally reinforced with specially processed iron aggregate of exceptional durability under heavy duty loading.
Packaging
- 50lb bags -
Stone Concrete Mix
A perfectly proportioned blend of high quality Portland Cement, clean concrete sand, and dry, crushed aggregate. Use where the thickness of finished Concrete will be in excess of 2 inches.
Packaging
- 66lb bags -
Sand Concrete Mix
A perfectly proportioned blend of high quality Portland Cement and dry, clean brick sand. Use where the thickness of finished Concrete will not exceed 2 inches.
Packaging
- 66lb bags -
Quickset Hydraulic Cement
A fast setting, high strength concrete plug to fill spaces, cracks and holes in concrete.
Packaging
- 50lb bags -
Mortar Mix
A perfectly proportioned blend of high quality type 'S' Masonry Cement clean and sharp brick sand. Use as a Masonry binder for brick, block and stone and as a Parging Mix.
Packaging
- 66lb bags -
Parging Mix
QUIKRETE Parging Mix is designed for resurfacing, coating and repairing concrete and masonry walls. It can also be used as a base coat in the repair of stucco.
Packaging
- 66lb bags -
Vinyl Concrete Patch
QUIKRETE Vinyl Concrete Patcher is a multi-purpose concrete repair material with strong adhesive properties. Trowels to a feather edge of 1/16" (1.6 mm). Made of a special blend of exterior grade vinyl resin, fine sand, and portland cement. Just add water.
Packaging
- 40lb bags -
Euco-Speed Red Line
A rapid-setting, cement-based concrete and masonry repair mortart. Euco-Speed Red Line is a proprietary formulation of blended portland cememnts, finely processed selected aggregates, and specific chemical additives which undergoes a chemical "hyper hydration" and produces a stable, low permeability, cementitious matrix. Euco-Speed Red Line can be "shaved" for detailed repairs.
Packaging
-50 lb bags -
Euco-Speed Blue Line
Is a proprietary formulation of blended portland cememnts, finely processed select aggregates, and specific chemical additives designed to provide a rapid set, particularily for underwater use. Euco-Speed Blue Line undergoes a chemical "hyper hydration" and produces a very stable, low permeable, cementitious matrix, when combined with the correct amout of water.
Packaging
- 50lb bags -
Thin-Top Supreme
THIN-TOP SUPREME is a latex and microsilica modified cementitious mortar designed for use as a floor or deck topping at thicknesses of 1/16" to 3/8" (1.6 mm to 10 mm). This product is a one part formula which incorporates powder latex technology. It provides excellent durability under freeze/thaw cycling as well as protection against ingress by water and deicing salts. THIN-TOP SUPREME offers normal set times and a mid range slump for easy workability.
Packaging
- 50lb bags -
Eucocrete
A versatile, single-component, microsilica-modified repair mortar that contains an integral corrosion inhibitors for concrete repair projects of all types. Requiring only the addition of water, Eucocrete is a high strength material with an extended work time for ease of placement. It is similar in appearance to concrete and is suitable for use as a topping or repair mortar concrete structures from 1" to full depth.
Packaging
- 50lb bags -
Tamms Thin Patch
TAMMS THIN PATCH is a polymer modified, cement based compound that is formulated for patching and repairing concrete and masonry. Can be worked from feather edge to 1" thick.
Packaging
- 50lb bags -
TammsPatch II
Tammspatch II is a two-component, polymer-modified, cementious repair mortar and flowable underlayment. When the two components are combined, Tammspatch II becomes a versatile mortar for numerous applications, due to its ability to be mixed at different consistencies. From flowable to firm, Tammspatch II provides an estheically pleasing surface in multiple applications.
Packaging
- 40lb bag and 1gal jug kit -
Flo-Top
FLO-TOP is a free flowing, self-leveling, compound specially designed for easy application over concrete floors as an underlayment for subsequent placement of floor coverings. It is suitable for use as a repair and leveling course and my be applied at thicknesses from featheredge to 1" (25 mm). FLO-TOP is a one part system requiring only the addition of water for mixing.
Packaging
- 50lb bags -
Sonotubes
The superior strength-to-weight properties of Sonotube forms prevent blowouts and may eliminate the need to use a crane during setup. Contractors around the world know Sonotube round concrete forms stand strong in their superior technology and value. Tough, durable and rain resistant. All Sonotubes are 12' long.
Sizes
6"
8"
10"
12"
14"
16"
18"
20"
24"
28"
30"
36"
42"
48"
